Tape Measure Holder / Mount for Milwaukee Packout Corner Rail System
Tape Measure Holder / Mount for Milwaukee Packout Corner Rail System
· Easily store and carry tape measures on the front, back or sides of the Milwaukee Packout Corner Rail System. The mount can be flipped upside down to work on either side.
· Two screws hold the mount firmly in place without drilling holes into the rail or marking it up with a set screw and without needing to disassemble the corner rail.
· If attaching the mounts to the front of your packout case, make sure to mount them below the locking latch, otherwise you might not be able to open the case.
· Note: Tape Measure not included
You're purchasing:
Tape Measure Holder for the Milwaukee Packout Corner Rail System.
Colour options:
We have the following colours available:- Black, red, yellow, orange, purple, blue and lime green. Please select your choice of colour from the drop down list and advise the name you would like in the personalisation section.
Actual colours may vary. Due to various monitor / phone settings such as brightness and contrast, screens display colour differently so our products may look slightly different in person from what you see on your screen. We try our best to make sure that our photos are as accurate as possible, but the actual colour may vary slightly from what you see online. Brighton3D will not accept responsibility for any colour or design differences that are not factory faults.
Sizes:
· Tape measures are 99mm wide, 57mm deep and 22mm in height.
· Manufactured in tough PETG plastic .
Manufacture and materials:
· The mounts are 3D printed, which leaves a texture on the top surface and layer lines on the sides.
· We design our products for strength and 3D print them for durability
· The plastic used is called PETG (Polyethylene Terephthalate Glycol), a thermoplastic polyester that provides good durability, heat resistance, strength and excellent printability for manufacturing.
Postage:
· Your mounts will be packaged in a small box to protect your order whilst on its way to you.
· Orders will be posted to you second class unless the first class postage upgrade option is selected.
· Please ensure you take note of our dispatch dates when placing your order and if anything is needed urgently please contact us so that we can make sure your item arrives in plenty of time.
· Discounts are available for buying multiple items and we always combine postage
Custom Milwaukee Mounts
We can design, customise and manufacture our own products so if you have a specific need for Milwaukee, battery or packout bins, mounts or adapters, contact us with your requirements and we’ll see if we can help.
Tape Measure Holder / Mount for Milwaukee Packout Corner Rail System
· Easily store and carry tape measures on the front, back or sides of the Milwaukee Packout Corner Rail System. The mount can be flipped upside down to work on either side.
· Two screws hold the mount firmly in place without drilling holes into the rail or marking it up with a set screw and without needing to disassemble the corner rail.
· If attaching the mounts to the front of your packout case, make sure to mount them below the locking latch, otherwise you might not be able to open the case.
· Note: Tape Measure not included
You're purchasing:
Tape Measure Holder for the Milwaukee Packout Corner Rail System.
Colour options:
We have the following colours available:- Black, red, yellow, orange, purple, blue and lime green. Please select your choice of colour from the drop down list and advise the name you would like in the personalisation section.
Actual colours may vary. Due to various monitor / phone settings such as brightness and contrast, screens display colour differently so our products may look slightly different in person from what you see on your screen. We try our best to make sure that our photos are as accurate as possible, but the actual colour may vary slightly from what you see online. Brighton3D will not accept responsibility for any colour or design differences that are not factory faults.
Sizes:
· Tape measures are 99mm wide, 57mm deep and 22mm in height.
· Manufactured in tough PETG plastic .
Manufacture and materials:
· The mounts are 3D printed, which leaves a texture on the top surface and layer lines on the sides.
· We design our products for strength and 3D print them for durability
· The plastic used is called PETG (Polyethylene Terephthalate Glycol), a thermoplastic polyester that provides good durability, heat resistance, strength and excellent printability for manufacturing.
Postage:
· Your mounts will be packaged in a small box to protect your order whilst on its way to you.
· Orders will be posted to you second class unless the first class postage upgrade option is selected.
· Please ensure you take note of our dispatch dates when placing your order and if anything is needed urgently please contact us so that we can make sure your item arrives in plenty of time.
· Discounts are available for buying multiple items and we always combine postage
Custom Milwaukee Mounts
We can design, customise and manufacture our own products so if you have a specific need for Milwaukee, battery or packout bins, mounts or adapters, contact us with your requirements and we’ll see if we can help.
Tape Measure Holder / Mount for Milwaukee Packout Corner Rail System
· Easily store and carry tape measures on the front, back or sides of the Milwaukee Packout Corner Rail System. The mount can be flipped upside down to work on either side.
· Two screws hold the mount firmly in place without drilling holes into the rail or marking it up with a set screw and without needing to disassemble the corner rail.
· If attaching the mounts to the front of your packout case, make sure to mount them below the locking latch, otherwise you might not be able to open the case.
· Note: Tape Measure not included
You're purchasing:
Tape Measure Holder for the Milwaukee Packout Corner Rail System.
Colour options:
We have the following colours available:- Black, red, yellow, orange, purple, blue and lime green. Please select your choice of colour from the drop down list and advise the name you would like in the personalisation section.
Actual colours may vary. Due to various monitor / phone settings such as brightness and contrast, screens display colour differently so our products may look slightly different in person from what you see on your screen. We try our best to make sure that our photos are as accurate as possible, but the actual colour may vary slightly from what you see online. Brighton3D will not accept responsibility for any colour or design differences that are not factory faults.
Sizes:
· Tape measures are 99mm wide, 57mm deep and 22mm in height.
· Manufactured in tough PETG plastic .
Manufacture and materials:
· The mounts are 3D printed, which leaves a texture on the top surface and layer lines on the sides.
· We design our products for strength and 3D print them for durability
· The plastic used is called PETG (Polyethylene Terephthalate Glycol), a thermoplastic polyester that provides good durability, heat resistance, strength and excellent printability for manufacturing.
Postage:
· Your mounts will be packaged in a small box to protect your order whilst on its way to you.
· Orders will be posted to you second class unless the first class postage upgrade option is selected.
· Please ensure you take note of our dispatch dates when placing your order and if anything is needed urgently please contact us so that we can make sure your item arrives in plenty of time.
· Discounts are available for buying multiple items and we always combine postage
Custom Milwaukee Mounts
We can design, customise and manufacture our own products so if you have a specific need for Milwaukee, battery or packout bins, mounts or adapters, contact us with your requirements and we’ll see if we can help.
