Universal Low Profile DeWalt Battery Wall Mount Triple - for 3 Batteries, Organiser for Power Tool Batteries, Garage/Workshop Organisation
Universal Low Profile DeWalt Battery Wall Mount Triple - for 3 Batteries, Organiser for Power Tool Batteries, Garage/Workshop Organisation
Our Battery Mounts for Dewalt Batteries hold up to three DeWalt 14v, 18v (both XR and non-XR) and FlexVolt 54v.
Can be mounted under shelves, in vans, etc.- batteries click into place using the batteries own spring mechanism, so don't fall out.
Manufactured in tough plastic with three countersunk screw holes for secure mounting to any suitable surface with countersunk screws.
Care should be taken to avoid over-tightening the screws to avoid cracking the plastic.
Screws must sit within countersink entirely to avoid interfering with the fit of the battery.
Batteries not included.
You're purchasing:
One Dewalt Triple Battery Mount.
Colour options:
We have the following colours available:- yellow, grey, black, green, red or blue. Please select your choice of colour from the drop down list.
Actual colours may vary. Due to various monitor / phone settings such as brightness and contrast, screens display colour differently so our products may look slightly different in person from what you see on your screen. We try our best to make sure that our photos are as accurate as possible, but the actual colour may vary slightly from what you see online. Brighton3D will not accept responsibility for any colour or design differences that are not factory faults.
Mount size:
Triple Mount is 45mm tall, 17mm deep and 233mm wide. Manufactured in tough plastic with three countersunk screw holes for secure mounting to any suitable surface with countersunk screws.
Manufacture and materials:
The mounts are 3D printed, which leaves a texture on the top surface and layer lines on the sides. We design our products for strength and 3D print them for durability. The plastic used is called PETG (Polyethylene Terephthalate Glycol), a thermoplastic polyester that provides good durability, heat resistance, strength and excellent printability for manufacturing.
Postage:
Your mount will be packaged in a padded envelope to protect it on it's way to you.
Mounts will be posted to you tracked postage to enable you to track your parcel up until delivery. There is the option to upgrade to first class postage on the second postage page dropdown.
Please ensure you take note of our dispatch dates when placing your order and if anything is needed urgently please contact us so that we can make sure your item arrives in plenty of time.
Universal Low Profile DeWalt Battery Wall Mount Triple - for 3 Batteries, Organiser for Power Tool Batteries, Garage/Workshop Organisation
Our Battery Mounts for Dewalt Batteries hold up to three DeWalt 14v, 18v (both XR and non-XR) and FlexVolt 54v.
Can be mounted under shelves, in vans, etc.- batteries click into place using the batteries own spring mechanism, so don't fall out.
Manufactured in tough plastic with three countersunk screw holes for secure mounting to any suitable surface with countersunk screws.
Care should be taken to avoid over-tightening the screws to avoid cracking the plastic.
Screws must sit within countersink entirely to avoid interfering with the fit of the battery.
Batteries not included.
You're purchasing:
One Dewalt Triple Battery Mount.
Colour options:
We have the following colours available:- yellow, grey, black, green, red or blue. Please select your choice of colour from the drop down list.
Actual colours may vary. Due to various monitor / phone settings such as brightness and contrast, screens display colour differently so our products may look slightly different in person from what you see on your screen. We try our best to make sure that our photos are as accurate as possible, but the actual colour may vary slightly from what you see online. Brighton3D will not accept responsibility for any colour or design differences that are not factory faults.
Mount size:
Triple Mount is 45mm tall, 17mm deep and 233mm wide. Manufactured in tough plastic with three countersunk screw holes for secure mounting to any suitable surface with countersunk screws.
Manufacture and materials:
The mounts are 3D printed, which leaves a texture on the top surface and layer lines on the sides. We design our products for strength and 3D print them for durability. The plastic used is called PETG (Polyethylene Terephthalate Glycol), a thermoplastic polyester that provides good durability, heat resistance, strength and excellent printability for manufacturing.
Postage:
Your mount will be packaged in a padded envelope to protect it on it's way to you.
Mounts will be posted to you tracked postage to enable you to track your parcel up until delivery. There is the option to upgrade to first class postage on the second postage page dropdown.
Please ensure you take note of our dispatch dates when placing your order and if anything is needed urgently please contact us so that we can make sure your item arrives in plenty of time.
Universal Low Profile DeWalt Battery Wall Mount Triple - for 3 Batteries, Organiser for Power Tool Batteries, Garage/Workshop Organisation
Our Battery Mounts for Dewalt Batteries hold up to three DeWalt 14v, 18v (both XR and non-XR) and FlexVolt 54v.
Can be mounted under shelves, in vans, etc.- batteries click into place using the batteries own spring mechanism, so don't fall out.
Manufactured in tough plastic with three countersunk screw holes for secure mounting to any suitable surface with countersunk screws.
Care should be taken to avoid over-tightening the screws to avoid cracking the plastic.
Screws must sit within countersink entirely to avoid interfering with the fit of the battery.
Batteries not included.
You're purchasing:
One Dewalt Triple Battery Mount.
Colour options:
We have the following colours available:- yellow, grey, black, green, red or blue. Please select your choice of colour from the drop down list.
Actual colours may vary. Due to various monitor / phone settings such as brightness and contrast, screens display colour differently so our products may look slightly different in person from what you see on your screen. We try our best to make sure that our photos are as accurate as possible, but the actual colour may vary slightly from what you see online. Brighton3D will not accept responsibility for any colour or design differences that are not factory faults.
Mount size:
Triple Mount is 45mm tall, 17mm deep and 233mm wide. Manufactured in tough plastic with three countersunk screw holes for secure mounting to any suitable surface with countersunk screws.
Manufacture and materials:
The mounts are 3D printed, which leaves a texture on the top surface and layer lines on the sides. We design our products for strength and 3D print them for durability. The plastic used is called PETG (Polyethylene Terephthalate Glycol), a thermoplastic polyester that provides good durability, heat resistance, strength and excellent printability for manufacturing.
Postage:
Your mount will be packaged in a padded envelope to protect it on it's way to you.
Mounts will be posted to you tracked postage to enable you to track your parcel up until delivery. There is the option to upgrade to first class postage on the second postage page dropdown.
Please ensure you take note of our dispatch dates when placing your order and if anything is needed urgently please contact us so that we can make sure your item arrives in plenty of time.
